Switch PRO Wireless Bluetooth Controller Headset for Switch Console with TURBO Keys + One-click Connection to Console
1. Wireless connection: about 8 meters
2. Input voltage: DC5.0V
3. Lithium battery capacity: 600MAH
4. Lithium battery weight: 14g
5. Working voltage: DC 3.6-4.2V
6. Working current: 20-30mA
7. Vibration consumption current: 50-150mA
1. Handle Features:
1) this pro handle is compatible with the switch host and also supports windows computers.
2) without any driver, the handle can be used after connecting with the switch host.
3) wireless connection, strong anti-interference ability and stable connection signal.
4) the connection mode of one button connection is simple and convenient.
5) built in 600mA polymer lithium battery, which can last for about 8 hours after being fully charged.
6) the built-in gyroscope of this handle supports the action sensing function; the built-in double motor supports the double shock function; and the turbo continuous firing function.
7) at most 4 wireless handles can be connected to the host at the same time.
8) when the handle is charged, you can also play the game normally.
9) ergonomic design and lightweight handle structure make players feel comfortable.
10) this handle can be upgraded by connecting the computer and using the update software.
2. Connecting Guidance:
1) connect the switch host via wireless:
A. connect the handle to the host for the first time: turn on the switch host. In the main menu interface of the host, touch "handle" → "change grip" with your fingers to enter the host pairing mode interface. On the handle, long press "home" key for 4 seconds to turn on the handle, and the four LED lights will flicker first, and then flash quickly at the same time after 4 seconds to enter the search state. When one (or more) led lights up for a long time , handle and host are matched successfully. Press "B" to return to the main menu interface.
B. connect the handle to the host again: press the home key briefly to open the handle, and the handle is automatically connected to the host.
C. handle back to host:
A. in the sleep state of the handle, short press the home key to wake up the handle, and the handle will automatically reconnect with the host.
B. in the sleep state of the host, first press the power key of the host to wake up the host, and then short press the home key of the handle to connect the host (in the sleep state of the host, directly press any key of the handle to wake up the host).
2) connect switch host through USB cable:
On the main menu page of the switch host, click settings → handle and sensor → Pro handle wired connection in order to open the pro handle wired communication function of the switch host; connect the handle to the USB port of the switch host base with USB cable, LED4 on the handle flashes slowly; LED1 on the handle flashes slowly after connecting the host.
3) connect Windows computer through USB cable:
First, you need to download and install the x-360 driver to the windows computer; then use the USB cable to connect the handle to the computer, and the four LEDs on the handle flash slowly; after the handle driver is installed automatically, the corresponding LEDs on the handle flash slowly, and the handle can be used. Support x-360 mode games. Please find the download method of x-360 driver on the network.
Note: under the x-360 mode of wired connection computer, there is vibration function and no motion sensing function.